Majestic Jasper Direct Vent Gas Insert
At a glance
- Type: Gas Insert
- Sizes: Standard, Tavern Brown Brick, Cottage Red Brick
- Fuel: Natural gas; propane model by note
- Ignition: IntelliFire
- Made by: Majestic, a Hearth & Home Technologies brand
Description
The Majestic Jasper is a 30-inch direct-vent gas insert with a log set and IntelliFire Touch, for an existing wood fireplace. It comes in 3 sizes: Standard, Tavern Brown Brick, Cottage Red Brick.
Who it's for
Right buyer. You want to convert a wood fireplace to gas at the lowest Majestic insert price, 30 inch, with a log set and IntelliFire Touch.
Wrong buyer. You want a bigger glass area or more sizes; the Trilliant and Ruby.
How it performs
The Jasper is the lowest-priced way into a Majestic insert: the 30-inch chassis the Ruby and Trilliant share, a log set, IntelliFire, at a price that leaves room for the liner and the surround.
Good to know
- One size, 30 inches.
- Its ignition is the IntelliFire 3 V system rather than IntelliFire Touch; wall switch and basic remote.
Specifications
Dimensions
Minimum fireplace opening
Measure the inside of your firebox: width at the front and at the back, height at the front and at the back, and depth. Each size needs at least the opening below, with the surround covering the rest of the old opening.
| Insert | Width, front | Width, back | Height | Depth |
|---|---|---|---|---|
| Jasper 30 Insert | 31‑5/8" | 20‑1/8" | 21 front, 19‑3/16 rear | 15 to the back of the surround; 14 with the 2 in. deep surround |
Add 4 in. to the height if the exhaust collar and damper do not line up. Surround sizes (W x H): 40 x 27, 42 x 30, 44 x 32. Standard surround 7/8 in. deep; 2 in. deep version available.
The insert itself
| Model | Width | Height | Depth |
|---|---|---|---|
| Jasper 30 Insert | 31‑1/8 front, 19‑5/8 rear | 20‑3/4 front, 18‑15/16 rear | 14‑1/2 |
Models and prices
Heat input is the range from the low to the high flame setting on natural gas and on propane. The LP model has the same price; order it by note.
| Model | Part | BTU per hour, NG | BTU per hour, LP | Fireplace only |
|---|---|---|---|---|
| Jasper Insert 30" | JASPER30IN | 21,000 to 30,000 | 19,600 to 28,000 | $2,319 |
Required to complete: Front Surround. The options below are the ones sold on this page; each is matched to its size.
Clearances
Clearances are to combustible materials, from the appliance. They come from the installation manual for this model and depend on how it is vented; the installer confirms them on site.
| Clearance | Minimum |
|---|---|
| Floor | 1/4 in. under the appliance; combustible flooring allowed in front; vinyl flooring needs a 24 x 30‑3/4 in. hearth |
Combustible mantel: the deeper it projects, the higher it must sit above the opening.
| Mantel projection | Minimum height above the opening |
|---|---|
| 12" | 12" |
Notes from the manual
Non-combustible mantel legs 20-7/16 to 22-7/16 in. from the centerline depending on the surround. Non-combustible zone for a zero-clearance wall extension: 12 in. maximum extension depth.
Documents
- Install Manual: Jasper (PDF)
- Owners Manual: Jasper (JASPER30IN) (PDF)
- Service Part List: Jasper (JASPER30IN) (PDF)
- Majestic user guides and manuals
Details
| Models | JASPER30IN |
|---|---|
| Type | Direct-vent gas insert |
| Fuel | Natural gas; propane model at the same price |
| Heat input | See the table above |
| Ignition | IntelliFire Touch intermittent pilot with battery backup |
| Controls | Wall switch; RC400 remote and IntelliFire app with the Wi-Fi module |
| Electrical | 120 V for fan, lights and accessories |
| Manufacturer | Majestic, a Hearth & Home Technologies brand, USA |
| Weight, Jasper 30 Insert | 70.0 lb |
Warranty
| Component | Coverage |
|---|---|
| Firebox and heat exchanger | Limited lifetime (20 years), 3 years labor |
| Burners, logs and metal or fiber refractory made by HHT | 10 years, 1 year labor |
| Cement refractory panels, glass liner panels | 3 years |
| Glass; electrical components (ignition modules, remotes and wall switches, valves, pilots, blowers, junction boxes, harnesses, transformers, lights) | 1 year parts and labor |
| All other parts | 1 year |
Source: Hearth & Home Technologies Limited Lifetime Warranty, the document packed with the appliance and linked from the owner's manual above. "Lifetime" means 20 years for gas appliances, 10 years for wood and pellet appliances and 5 years for standalone gas log sets, counted from the start of coverage, which begins no later than 24 months after the appliance ships from the factory.
Heat
Heat input per hour on natural gas and on propane, low to high, and the efficiency where the maker publishes it.
| Model | BTU, natural gas | BTU, propane | Efficiency |
|---|---|---|---|
| Jasper 30 Insert | — | — | — |
Choices and prices
Front
The front is the finished face of the fireplace. A clean-face trim frames the glass with a thin edge for a built-in look; overlap and arched fronts sit on the wall and carry a screen.
| Front | Part | Price |
|---|---|---|
| Contemporary Arch 30" screen front - Black | CASFI30BK | $499 |
| Contemporary Arch 30" screen front - New Bronze | CASFI30NB | $529 |
| Small 30" surround 40" x 27" - Black | MI30‑4027-BK | $409 |
| Small 30" surround 40" x 27" - New Bronze | MI30‑4027-NB | $439 |
Interior and media
The interior is what you see behind the fire: a brick liner, a reflective black glass liner, or glass media in place of logs.
| Interior or media | Part | Price |
|---|---|---|
| Traditional 30" Brick interior panels - Tavern Brown | BRICKMI30TB | $319 |
| Traditional 30" Brick interior panels - Cottage Red | BRICKMI30CR | $319 |
Fans, heat management and controls
Available for this fireplace and priced by Majestic. Ask us to add any of them to your order.
| Item | Part | Price |
|---|---|---|
| Clean 30" screen front - Black | CSFI30BK | $449 |
| Clean 30" screen front - New Bronze | CSFI30NB | $469 |
| Inside fit 30" screen front - Black | INFIT-30-BK | $399 |
| Direct vent insert kit - one 4 - liner, one 30 - liner, plus term cap components | LINK-DV4‑30B | $579 |
What arrives
- 6 Ceramic Fiber Split Logs
- IntelliFire Ignition System
- Ceramic Glass
- Glowing Embers/Lava Rock
- Battery Back Up
- Electrical Cord - 10' 3" Left, X 7' 6"
- Right
- Gas Flex Connector
- The front, interior and any accessories ship as their own cartons.
Installation
| Venting | Requirement |
|---|---|
| Type | Direct vent, co-linear |
| Min vertical | 10 ft |
| Max vertical | 50 ft |
| Termination | vertical only |
| Liner | Two 3 in. flexible liners: LINK-DV30B or LINKSQ-DV30 (two 30 ft liners and cap), or LINK-DV4‑30B (30 ft exhaust, 4 ft intake) |
Restrictor: none to 25 ft, one open 26 to 35 ft, both open 36 to 50 ft.
The insert slides into an existing masonry or factory-built wood fireplace and vents through two flexible liners run up the old chimney to a cap on top. The chimney is inspected first, and the liner kit is sized to its height and sold separately.
Planning the install
- Installation is by a licensed gas installer. The fireplace, its venting and the gas line are inspected together, and the warranty depends on it.
- Framing, clearances to combustibles, mantel heights and the vent run come from the installation manual for your size. Send us your plan and we will check it before anything ships.
- Venting is sold separately and priced from the installer's plan: the pipe, elbows and termination depend on where the vent exits. Ask us for a vent quote with your order.
- Propane: every model is also made in an LP version at the same price. Add a note to your order and we will confirm the LP model before it ships.
- A 120-volt outlet or junction box at the fireplace is needed for the fan, lights and accessories; the ignition itself has battery backup.
- Special-order goods ship by freight. Confirm the size and the front before you order.
Questions
Will it fit my fireplace?
Send us the width, height and depth of your firebox opening, front and back, and the height of the chimney. Each insert size has a minimum opening in the installation manual, and the surround covers the rest. We check every insert order against it before it ships.
What is a front, and why is it required?
A Majestic direct-vent fireplace ships as the firebox and glass. The front is the finished face that covers the frame and the vents: a clean-face trim that disappears into the wall, or a decorative front with a screen. The fireplace cannot be finished without one, which is why the page will not let you order without choosing it.
What is IntelliFire Touch?
Majestic's intermittent-pilot ignition system. There is no standing pilot burning all year; the fireplace lights when you turn it on, from the wall switch, the remote or the app. It has a battery backup, so it still lights in a power outage. Flame height, the fan and the lights are controlled from the RC400 remote or the IntelliFire app with the Wi-Fi module.
Does it heat the room?
Yes. A direct-vent fireplace is a sealed heater: it draws combustion air from outside and sends its exhaust outside, so all the heat from the glass goes into the room. With the optional fan it warms a good-sized room; the passive heat and heat-zone kits move heat to another room or out of the wall above.
How is it vented?
Through a coaxial direct-vent pipe out the top or the rear, to a termination on the roof or through an outside wall. No chimney is needed. The pipe, elbows and cap are sized to your house and sold separately.
Can I get it in propane?
Yes. Add a note to your order and we will confirm the LP model, which is the same price.
If you have any questions about this product, please let us know by filling out the form below, and we will contact you as soon as possible.
- Choosing a selection results in a full page refresh.