Osburn 1700 Wood Stove

The Osburn 1700 Wood Stove is an EPA 2020 certified wood stove for 500 to 1,800 sq ft. It burns up to 7 hours on a load and takes a 6-inch chimney.

Who it's for

Right buyer. Owners of medium-sized homes, cabins, well-insulated open-plan single-story spaces, or finished basement/main-floor combinations of roughly 800–1,600 sq ft, with reasonable insulation and access to seasoned hardwood at 15–20% moisture content.

Buyers stepping up from the small-stove platform (Osburn 950 or Enerzone Solution 1.4) who need more heat output, longer log capacity, and longer burn cycles.

How it performs

The 65,000 BTU/hr maximum is a peak rating, transient, achieved on dry cordwood at high loading density and short reload intervals. The figure that matters for daily life is the sustained output across a full burn cycle, which lands in the 9,800–52,200 BTU/hr band per the CSA B415.1-10 stack-loss method.

Good to know

• Same platform as the Enerzone Solution 1.7.
• Medium-size firebox, medium burn time.
• The 1,800 sq ft figure is aspirational. The most consistent owner regret across medium stoves is buying for the high end of the manufacturer's heating range.

Dimensions

Dimensions from the specification sheet

Dimensions

Where it can go

The Osburn 1700 is approved for installation in residential homes, cabins, sunrooms, alcoves (with double-wall pipe connector), and mobile or manufactured homes (with the required fresh-air intake kit and insulated intake pipe). It is not approved for installation in factory-built (prefab) metal fireplaces or in any outdoor or unconditioned space.

Clearances to combustibles

Floor protection

For the Osburn 1700, the manual specifies no R-factor required for floor protection — only a continuous, non-combustible material. Approved materials include steel of at least 0.015" thickness, ceramic tiles sealed together with grout (over a continuous non-combustible sheet beneath), cement board, brick, or any other approved or listed material suited for floor protection. Tile alone is not sufficient — a continuous non-combustible sheet beneath the tile is required.

Floor protection dimensions per the manual: in Canada, 18 inches forward of the door opening and 8 inches each side; in the USA, 16 inches forward of the door opening and 8 inches each side. In Canada, the manual also requires ember protection extending at least 18 inches in front of any door and 8 inches on other sides per CSA B365. No floor protection is required if the stove is installed on a non-combustible floor (concrete slab, for example).

Clearances

United States figures, in inches. The rating plate on the appliance overrides any published number; the installer confirms on site.

Documents

• Wood stove manual | Safety notifications & general information (PDF - 2.9 MB)
• Osburn 1700 wood stove installation & operation requirements (PDF - 8.7 MB)
• Osburn 1700 dimensions (PDF - 0.8 MB)
• Maximum recommended heating area by climate zone (PDF)
• Osburn wood products brochure, USA edition, with dimension drawings (PDF)
• Osburn limited lifetime warranty
• EPA test reports
• Replacement parts

Details

Warranty

A one-time replacement limit applies to all parts with lifetime coverage. Warranty is void if the unit is used to burn anything other than seasoned cordwood, or if it is not operated according to the owner's manual. Damage caused by misuse, improper installation, lack of maintenance, overfiring, downdrafts, venting problems, or under-estimated heating area is not covered. Improper installation by anyone other than an authorized qualified technician voids the warranty.

Warranty claims are made through your Osburn dealer and remain subject to SBI/Osburn inspection, approval, and the current written warranty. Kaminos is the retailer for this stove and supports buyers through purchase; final warranty approval rests with SBI as the manufacturer. SBI's parts network is well-stocked — replacement bricks, baffle, secondary tubes, glass, gaskets, and optional blower are openly available at fair prices through multiple parts vendors.

Osburn may require photos or returned parts to support a claim; repair work covered by warranty requires prior manufacturer approval.

Coverage details can change by component and warranty revision; the current Osburn warranty controls.

Heat

From the specification sheet

Choices and prices

Options

The unit price is Osburn's 2026 list price for the wood stove alone. Options sold on this page add to it; those marked on request we add to your order by hand.

Door overlay

Base

Blower

Fresh air

Other options

What arrives

• Osburn 1700 wood stove (OB01700) with welded carbon-steel firebox and arched cast-iron glazed door
• Choice of base, configured at order: black traditional legs, black straight legs, black pedestal, brushed-nickel traditional legs, or brushed-nickel straight legs
• Choice of door overlay, configured at order: Black (OA10249) or Brushed Nickel (OA10250)
• Built-in ash drawer (sized to the base configuration)
• C-Cast baffle and stainless-steel secondary-air tube assembly
• Stainless-steel heat shield over the C-Cast baffle
• Top heat deflector that redirects heat toward the front of the stove
• High-density refractory firebrick lining
• Decorative side panels
• Owner's manual and product documentation

Sold separately

• Code-compliant 6-inch chimney system — listed factory-built chimney for new installations, or an approved masonry chimney/liner configuration where permitted by code and verified by the installer/AHJ; required venting components are sold separately
• Single-wall or double-wall pipe connector between the stove and chimney — double-wall is required for alcove and mobile-home installations and reduces clearance requirements
• Hearth pad or floor protection sized to manual specifications, with continuous non-combustible sheet beneath any tile
• Optional 130 CFM variable-speed blower with thermodisc heat sensor (SBI AC01000) — adds forced-air circulation to improve heat distribution; without it, heat moves by radiation and natural convection only
• Optional glass ash lip — visible glass strip at the door opening; sold separately
• Optional 5-inch fresh-air intake kit (SBI AC01291 for legs, AC01336 for pedestal) — required for mobile-home installations and for code or mechanical-ventilation requirements
• 5-inch insulated flex pipe for fresh-air intake (ULC S110 / UL 181 class 0 or class 1 insulated HVAC pipe) — required for mobile-home installations
• Optional 5-inch fresh-air intake register with airtight damper — useful where local code, airtight-home design, or owner preference calls for a closable outside-air damper; do not close while the stove is in use
• Optional rigid fire screen (SBI AC01299) — not permitted for open-door use in the United States or in Canadian provinces/jurisdictions with particulate-emission limits; never permitted for use in a mobile home; never leave the stove unattended when used with a fire screen
• Optional heat shield AC02762 for further clearance reductions to 2 1/2" on rear, side, and corner measurements (subject to the door-handle 6" side-wall exception)
• Pin-type wood moisture meter — not optional in practice
• Stove-top or flue thermometer — strongly recommended; not optional in practice
• Installation by an authorized qualified technician (WETT, NFI, or CSIA certified) — required for warranty coverage and often required by code, permit, or insurance

Installation

Chimney requirements from the specification sheet

The Osburn 1700 performs best on a 6-inch chimney flue system. New factory-built chimney systems must comply with UL 103 HT (USA) or ULC S629 (Canada) and be suitable for solid fuel. The stove may also be connected to a code-compliant masonry chimney, provided the chimney has either a clay liner or a suitably listed stainless-steel liner and the application is verified by a qualified installer. Minimum chimney height must follow the current manual, certification label, installer verification, and local code — Osburn documentation may list different minimums by source and configuration. The chimney must extend at least 3 feet above the highest point of contact with the roof and at least 2 feet above any roof line or obstacle within 10 feet horizontally, subject to local code and installer verification.

For mobile-home installations, single-wall pipe is strictly forbidden — only double-wall pipe is permitted, and a fresh-air intake kit with insulated intake pipe is required. The fresh-air intake pipe (HVAC type) must meet ULC S110 or UL 181 class 0 or class 1.

Outside air

An optional fresh-air intake kit is available for code jurisdictions requiring outside combustion air, for tight new-construction homes with mechanical ventilation, and is required for mobile-home installations. Use the AC01291 5-inch fresh-air intake kit for stoves on legs, or the AC01336 for stoves on pedestal. Mobile-home installations also require insulated 5-inch flex pipe (ULC S110 / UL 181 class 0 or class 1 insulated HVAC pipe). A smoke detector and carbon monoxide detector are required in the room where the stove is installed.

Codes and approvals

Code compliance for any specific installation is determined by the local Authority Having Jurisdiction. Manufacturer listings cover what the stove is approved for; the AHJ approves what is permitted at your address. A WETT (Canada), NFI, or CSIA (USA) certified installer is strongly recommended and frequently required by code, permit, or insurance. Confirm local requirements before purchasing — particularly in EPA non-attainment counties and in HOA jurisdictions where new wood-burning installs may be restricted.

California Proposition 65

This product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov.

Planning the install

• Check with your building department and insurer: wood appliances need a permit in most places and an inspection after installation.
• The chimney is the other half of the system. It is sold separately and quoted from your installer's plan.
• Clearances and floor protection come from the manual and depend on the pipe and shields you choose. Send us your plan and we will check it.
• Burn seasoned wood below 20 percent moisture. Wet wood is the cause of most complaints about any wood stove.
• Special-order goods ship by freight.